ZXCTN6200/6300 (V1.10) supports maximum () UNI interfaces.
A.32
B.36
C.52
D.64
A.32
B.36
C.52
D.64
第3题
A.For ZXCTN6100 equipment of Version 1.0, monitoring IP of EMS is LOOPBACK1 of the equipment
B.For ZXCTN6100 equipment of Version 1.1, monitoring IP of EMS is LOOPBACK1 of the equipment
C.For ZXCTN6200/6300 equipment, monitoring IP of EMS is interface IP of the equipment
D.For ZXCTN6200/6300 equipment, monitoring IP of EMS is LOOPBACK IP of the equipment
第4题
A.6300V2.00.00
B.6200V1.10
C.6220V2.10
D.6300V1.10
第6题
第7题
A.switchport mode trunk
B.mcc-vlan bandwidth 100
C.mcc-vlanid xxxx (xxxx为该端口的监控VLAN)
D.switchport mode access
第8题
A.One equipment can be configured with multiple VLANs, each with an IP address, and these IPs can locate in one network segment;
B.Qx interface of ZXCTN6263V1.0 is not available, so when the equipment acts as access NE, some port of its GE line card is used as a substitution to connect with T3 server.
C.MCC management VLAN value range should be in 3001-4093. On T3, these VLAN values are automatically shielded to prevent collison between management VLAN and service VLAN;
D.When ZXCTN6200/6300/9000 connects with an access ring in the downstream, it is recommended that the access ring form. a closed loop physically to realize MCC monitoring protection;
第9题
A.同一端设备,不同VLAN配置接口IP地址可以在同一个网段内
B.ZXCTN6263V1.0版本的Qx口不能使用,所以当该设备作为接入网元时,需要使用GE线卡的某个端口作为与T3网管服务器连接的端口,替代Qx 口
C.用于MCC的管理VLAN的范围控制在3001---4093,T3网管上自动屏蔽这些VLAN值,防止管理VLAN和业务VLAN冲突
D.ZXCTN6200/6300/9000下挂接入环时,建议接入环尽量物理上闭合成环,以实现MCC监控保护